| Model # |
Price |
Description |
Developer Kit
DEV-KC1 |
$649 |
Our latest and most advanced IR MASTER Model Cybermate, X10 TW523 power line interface, Developer Manual, Developer software, Wall Power module and cabling, Telephone & email support.
To add additional capability
see the "Add In" and "Accessories" below. |
Dev Kit
Only
DK-1 |
$129 |
Developer Manual, Developer software, Telephone & email support. |
Additional Cybermate
CYB-2 |
$499 |
"Add In" a Cybermate. Add additional Cybermates for multi-zone
control. Each Cybermate has 3 addressable IR outputs, an RS232 port for
PC communication, an RS485 port for multiple Cybermate communication, an
X10 port for lighting control using our TW523 power line interface, a SWP
expansion port for multiple I/O, and a
3LAN port for our 3LAN accessories. |
| Model # |
Price |
Description |
| SWP |
$259 |
Remote I/O Expander board - Plugs into Cybermate's SWP I/O jack.
Adds 8 inputs and outputs (IR or switch). Up to 8 boards can be
added. Distribute them up to 50' apart, and/or stack them for up to
64 I/O. |
| EM1 |
14 |
"Stick on emitter" to place over the infrared sensing
eye on your A/V gear. Plugs directly into one of Cybermate's
3.5mm IR output jacks. $10 |
| EM2 |
16 |
"Stick on emitter". Same as the EM1, but visibly
blinks when sending IR. |
| DM1 |
18 |
Dual "Stick on emitter". Allows the same ouput
to be connected to 2 sensing eyes. |
| BL3 |
69 |
IR Blaster - Plugs into one of Cybermate's 3.5mm IR output
jacks. Controls gear up to 30 feet from the blaster. Requires
9 Vdc wall transformer (DC-9) |
| TW523 |
$24 |
X10 Power line interface between Cybermate and your homes AC wiring to
allow the control the lighting in your home. |
| DC-9 |
10 |
9Vdc wall transformer for use with the BL3 or as a spare
transformer for Cybermate |
| PAE |
19 |
European Cybermate Power Adapter: 220 VAC to 9 VDC (500 ma). |
| Model # |
Price |
Description |
| TSR |
$149 |
3LAN I/O board with Temperature sensor, Switch state sensor,
& 1A Relay Output all on one board. Use one or more TSRs with
Cybermate to sense temperature, check the state of any device with a dry
contact closure, or to power a device. All sensors have their own
unique address. |
| XCVR-B |
149 |
Infrared Transceiver that adds remote IR zone control to
IR Master. Each Transceiver has its own unique address and contains
an IR receiver and one IR output channel. Up to eight Transceivers
can be daisy chained and spaced up to 800 feet on standard 6
wire cable. Plugs directly into Cybermate or anywhere on the 3 LAN
Network. Comes packaged in a small enclosure for shelf
mounting. |
| CS2-3LAN |
149 |
Changes state on an adjustable AC current level (10 Watts on up). It uses a non-contact current sensor next to
the line cord to monitor current in the wire. |
| LS2-3LAN |
149 |
Changes state on any adjustable light level. The
stick-on sensor head monitors the light level from panel LEDs
for reporting the mode of equipment. It can also measure sunlight
level for opening or closing drapes |
| FB2-3LAN |
149 |
Changes state on an adjustable level of magnetic
energy as is found around a TV or computer CRT monitor. It mounts
near any target device for non-contact sensing. This feature
is especially helpful in gear with "toggle" On/Off
commands. |
| AV2-3LAN |
149 |
Changes state on any adjustable Audio or Video
level. The unit senses the output from any source for reporting
the mode of that equipment. With adjustable Delay pot. |
| VS2-3LAN |
149 |
Changes state on any adjustable Voltage level.
The unit senses a differential voltage (5 to 50V floating up
to 100V) from any source for reporting the mode of that equipment.. |
| TS2-3LAN |
149 |
Changes state on any adjustable temperature level.
The remote sensor head monitors the local temperature of the
equipment. |
| LTEE |
89 |
3LAN "Tee" accessory that allows branching anywhere
on the daisy-chain of 3LAN devices. |