Developer's Corner

Use our Developer Kit to create software to automate almost anything.  Learn and transmit
infrared commands.  Multiple outputs gives control over identical equipment.  Receive and send
all X10 power line commands which includes  Two-Way as well as standard appliance modules.
Control RS485 devices at any baud rate.  Detect Sensor states.  Open and close switches.  
Translate between any kind of input and output.

Developer Kit Includes:

• Our latest and most advanced IR MASTER Model Cybermate
• X10 TW523 power line interface
• Developer Manual -describes how to control all IR MASTER features
• Developer software -illustrative examples are written in Visual Basic
• Wall Power module and cabling
• Telephone & email support

IR MASTER Model Cybernate features

• PC RS232 port with software adjustable baud rates (9600 to115,200)
• RS485 port also with "on the fly" software adjustable baud rates (9600 to 115,200)
• Built in infrared (IR) learning for both carrier and flash based remotes.  IR transmission just requires appending a couple of bytes to specify one or more IR output addresses. 
• Three on board 3.5mm stereo jacks, each with an addressable IR output and dry contact switch input.
• Internal IR Blaster Channel
• X10 power line interface port (connects to TW523).  Two-way and standard X10 is supported.
• SWP port to connect up to 8 of out optional SWP boards to give up to64 addressable IR and switch outputs and up to 64 dry contact switch inputs.
• 3LAN  port to connect to our optional addressable sensors (Current, Voltage, Light, Temperature, Audio, Video, Magnetic).

Optional SWP Boards

• Eight addressable IR or switch outputs (selected by dip switch).  Each output has an LED indicator
• Eight addressable dry contact switch inputs
• Up to 8 boards can be connected for up to 64 addressable inputs and outputs

Pricing and Order Form

Home